The OilSmart switch is itself—a dead simple switching device for turning on a pump or some other devices like valves or whatever you want to turn on in the presence of water or off in the presence of oil. In its simplest form it is merely a solid state pump controller on/off switch that can be mounted onto in any surface where oil and/or water might show up. It can be furnished bare bones—so you can wire it into a control panel or we can furnish it with a built in relay and piggyback plug so you can literally plug your pump (or?) into it for simple plug and play operation. These simple very rugged switches have no moving parts—and operate by measuring the capacitance value of the water / oil they are in. Unlike simple conductivity probes—the OilSmart switches don’t need cleaning after being in contact with oil!
SkimOIL, Inc. / 103 W. Weaver Street #2C / Carrboro, NC 27510 / USA
(P) +1 (314) 579.9755 / (F) +1 (314) 558.9253
firstname.lastname@example.org / www.skimoil.com
Copyright © 1995-2017 All Rights Reserved / SkimOIL® is a Registered Trademark #3453418
Oil Skimming and Oil Water Separation Consulting