|
Workboats, Ships, Off-Shore Platforms
USCG Approved
Meets IMO MEPC 60 (33) Regs.
EconoMarine Economy Marine
Oily Water Separators
 Designed with the workboat operator in mind, the Bilge Water Economy Marine Oil Water Separator (BEMOWS™) combines simplicity and reliability to produce a fully automatic system that operates continuously with virtually no maintenance.
GOT WATER? Need IMO MEPC 107(49)?
These oily/water separators are USCG and IMO certified, meeting all the requirements. The BEMOWS™ utilizes permanent media - which never requires cleaning or replacement - in a unique, two-pass design to produce effluent with exceptionally low oil levels.
The separation process is as follows:
- As the oily water first enters the large volume pass chamber, its velocity slows dramatically. This reduction in speed accelerates the natural separation process and forces the vast majority of oil out of the water. Prior to exiting the unit, the oily water passes through a second oil retentive polishing chamber. Any residual oil will cling to the polymer polishing beads, which possess an amazing affinity for oil.
- When enough oil collects in the separator, clean water discharge is secured and a flush cycle is automatically initiated. When the flush cycle is complete the unit automatically resumes operation with absolutely no operator action.
Simple to operate, easy to maintain and exceptionally rugged, the BEMOWS™ is the affordable solution to all of your oil separation needs.
ALL ships requiring oily/water separators
must have an approved bilge alarm.
Click here for information on our Oil Content Monitor.
Standard Features
- Permanent media never requires replacement or cleaning.
- Two-stage design for maximum oil separation.
- Progressive cavity pump.
|
- Positive shut-off solenoid valve for maximum operational reliability.
- Fully automatic operation.
- 304 stainless steel system piping.
|
- Powder coated steel vessel for extremely rugged applications.
- All bronze valves.
|
CAUTION: If you are using cleaners and soaps - STOP HERE. CAUTION!
Don't go buy one from us or anyone else until we talk. Call us.
Your situation may not allow use of a regular oil water separator. Call!
NO oil water separator can handle an emulsion.
So let's talk about your application.
Specifications
|
Model
|
Max
Flow
GPM / M³
|
HP
|
Water
Connections*
Inlet
|
Dimensions
LxWxH
inches (mm)
|
Dry Weight lbs. / Kg
Dry Wt. (Wet Wt.)
|
BEMOWS 2.2
BEMOWS 4.4
BEMOWS 8.8
BEMOWS 11
|
2.2 / .5
4.4 / 1
8.8 / 2
11 / 2.5
|
1/2
1/2
1/2
1/2
|
3/4" FNPT
3/4" FNPT
1-1/4" FNPT
1-1/4" FNPT
|
22(560) x 21(533) x 43(1092)
24(610) x 24(610) x 51(1295)
28(711) x 30(762) x 60(1524)
31(787) x 36(914) x 61(1549)
|
200 (90) / 441 (200)
316 (144) / 711 (323)
450 (204) / 993 (451)
600 (272) / 1323 (601)
|
* All other water connection specifications are 3/4 FNPT such as: oil outlet, clean water inlet, proc. water outlet overboard and proc. water outlet recirculation
** Add 6 inches or 150mm to width for oil content monitor
ALL ships requiring oily/water separators
must have an approved bilge alarm.
|
|
