How The Oil Skimmer Works:
Skimoil's Fishboy Oil Skimmers use our specially formulated FishTube collector tube that is sized in length for the application and welded into a continuous loop. FishTube collector tube floats on the surface of water and is driven in a continuous loop by the skimmer. Oils, fats, and grease cling to the outside surface of the tube and are drawn into the skimmer. The material drawn into the skimmer is scraped off by abrasive resistant Dureon® scrapers and flows into a sludge pan with drain coupling. The clean tube is then driven back to the surface of the water by the skimmer to remove more material.

Animal fats, cooking oil, cutting oil, diesel fuel, fly ash, gasoline, grease, hydraulic oil, jet-a fuel, kerosene, lubricating oil, paint sludge, quench oil, RAD waste, silicone, solvents, sludge, soybean oil, tramp oil, vegetable oil, waste oil - no problem for a Skimoil Fishboy Oil Skimmer with FishTube collector tube.

1. Oil Skimmer - Model SS10 "Large Mouth"
The largest Tube Type oil skimmer available! Designed for indoor and outdoor applications where the highest removal rates of any Tube Type skimming system are essential - Large settling basins, scale pits, cooling ponds and pre-filtration waste water treatment settling basins. Uses our 1" FishTube for maximum oil, fat and grease removal.

Skimoil Model SS10 "Large Mouth" Oil Skimmer With Angle Frame Mount (Shown Without Safety Cover)

Skimoil Model SS10 "Large Mouth" Oil Skimmer With Angle Frame Mount And Sludge Pan

Typical Removal Rates:

• Light Oils & Grease - 14 GPH
• Medium Oils & Grease - 34 GPH
• Heavy Oils & Grease - 80 GPH
• High speed units are available that nearly double the removal rate capacity of the oil skimmer.

The Model SS10 Is Supplied Complete With:

• 1/2 HP 115/230 Volt single phase motor or 230/460 Volt three phase motor.
• Safety guard with integral Dureon® scrapers & pressure blocks.
• Lubed for life gear reducer, bearings and sprockets.
• Quick connect and release Drive and Pulley Wheels.
• Single ring replaceable Dureon® Drive and Pulley Wheel Wear Rings.
• Modern Drive and Pulley Wheel timing belt drive system with belt tension device.
• Rear safety guard.

2. Oil Skimmer - Model SS43 "Small Mouth"
Standard size Tube Type oil skimmer. Designed for indoor and outdoor applications - oil and grease settling basins, cooling water and settling ponds, and large multiple machine central coolant systems. Uses our 3/4" FishTube for standard oil, fat and grease removal rates.

Skimoil makes SS43 "Small Mouth" With Safety Cover & Angle Frame Mount

Skimoil makes SS43 "Small Mouth" Oil Skimmer - Rear View

3. Oil Skimmer - Model LG52 "Minnow"
The most compact Tube Type oil skimmer available! Designed for applications where space is limited - Parts washers, small oil/water pre-filtration equalization tanks and individual machine and central coolant systems. Uses our 1/4" FishTube for fast and easy tramp oil, waste oil and other material removal needs.

Typical Removal Rates:

• Light Oils & Grease - 4 GPH
• Medium Oils & Grease - 9 GPH
• Heavy Oils & Grease - 20 GPH

The Model LG52 Is Supplied Complete With:

• 1/12 HP 115 Volt single phase motor
• Safety guard with integral Dureon scrapers & pressure blocks
• Lubed for life gear reducer, bearings and sprockets.
• Sludge pan with 1" drain coupling
• 3’ of 1" drain hose with clamp for connection to drain coupling

Skimoil Model LG52 "Minnow" With Universal Mount Customer's Site

Skimoil Model LG52 "Minnow" Oil Skimmer Customer's Site

Oil Skimmer Removal Rates
Removal rates for any oil skimmer depend on the viscosity of the material being removed and the amount of new material introduced into the application area on a regular basis. The higher the quality and more viscous the material the higher the removal rate.

Performance And Quality Guarantee:
Every Skimoil product is sold with an unconditional performance and quality guarantee that ensures total customer satisfaction. See our Performance and Quality Guarantee for complete details.