Standard Features: extended details
· Carbon Steel Vacuum Pressure Vessel
· Industrial Epoxy Coating
· Automatic & Manual Controls
· Total Petroleum Hydrocarbon Monitor
· Coalescing Filter Media
· Centrifugal Pump
· Level Transmitter
· NEMA 4X Control Panel
· Multipoint Capacitance Level Sensor
· Reliable RF Point Level Switch
· Factory Installed Piping & Valves
· 5-45 gpm Processing Rates
|
Options:
· CE MARK Certification
· Emulified Oil Handling System
· PLC for "Hands Off" (HOA) Operation
· Integration with Existing System
· PH, Temperature and Flow Transmitters
· Flow Meters (Oil & Water)
· Stainless Steel Construction
· Site Specific Industrial Coatings
· Auxiliary Recovered Oil Storage Tank
· Site Specific Controls & Instrumentation
· Site Specific Programming
· Explosion Proof
· Various Pump Types
· Sizes larger than 45 gpm
|
Complete Ready to Operate · Automatic Operation
Simple Reliable Design & Operation · Small Footprint
General Description
Bilge Oil Water Separators (BOWS) Removal Systems are industrial marine grade oil water separators that have a variety of applications. Fully US Coast Guard certified with vessels and piping in the standard oil water separator unit being constructed from carbon steel to ASME specifications and are coated with an industrial strength epoxy coating.
 |
NEW BRUTE IMO MEPC 107(49) Certified
107 Series Bilge Oil Water Separator
In January of 2005, many
countries began requiring new ships and
ships replacing oil water separators (over 400 tons)
to meet the IMO MEPC 107(49) regulations.
This regulation requires removal of not
only free oil as the previous regulation
did, but also what is called "fluid
C". Also oil content monitors are required
to track results of separation. This new
requirement has significantly raised the
price of a bilge separator and limited the
separators to choose from. The BRUTE Series
107 brings you the best, economical
system available today to meet this new
requirement. Our filter exchange program
makes it easy.
|
 |
BRUTE IMO MEPC 60(33) Certified
"T" Series Bilge Oil Water Separator
With US Coast Guard and
IMO MEPC 60(33) certification our standard
BRUTE separators are installed all over the
world in many applications. They are known
for their heavy duty construction, simple
and efficient operation and affordability.
Each unit comes built to operate for long
periods of time in a harsh industrial/marine
environment with very little maintenance,
attention or trouble. This unit can be provided
to match any electrical power needs. Normally
provided standard with a 3 phase power requirement. These
series "T" model separator systems
include oil in water (TPH) monitoring and
recycle systems that test the discharge
water and assure compliance with the discharge
limit. Any water not meeting the limit is
recycled.
|
 |
BRUTE Marine/Industrial High Flow
Oil Water Separator
This
new option can save a tremendous amount
of money on a separator in the situation
when large amounts of water need to be processed
that are mostly clean, but must be monitored
and processed if oil content is above the
limit. As an example 400 gpm can be processed
from a pond or tank and moniored continuously.
The separator is bypassed until it is needed
and then processes the oily water at 45
gpm when needed.
|
 |
BRUTE
Series "I"
Industrial Oil Water Separator without Oil
Content Monitor
For
all kinds of industrial applications these
series "I" model separator systems
are built to be for totally automatic operation.
No consummables or maintenance. Just set
them and forget them.
|
US Coast Guard Certified
Our line of BRUTE marine Oily Water Separator is certified by the US Coast Guard. These certifications include both the older IMO MEPC 60(33) certification and the new IMO MEPC 107(49) certification. Units were tested by certification labs to operate within the limits and regulations of the IMO standards. Coast Guard certification is therefore available for your unit as an option if you need it.
IMO - International Maritime Organization
The IMO has established the standards that have to be met for certification. Our BRUTE units have been tested to these standards and the testing verified by the USCG for both regulations 60(33) and 107(49).
ABS Certification
ABS has given it's type approval to the BRUTE Separator.
Canadian Coast Guard Type Approval
BRUTE OIL WATER SEPARATOR ADVANTAGES & BENEFITS
Complete - Ready to Operate
BRUTE oil water separator units are shipped complete with motor, pumps, piping and controls and are ready to be easily installed and operated without delay.
Automatic Operation
Operation of this unit is a simple process. With just a little training the system can be started & runs automatically from that point on.
Simple Reliable Design & Operation
These oil water separator systems are designed to be simple. No complicated piping or schemes. Reliability comes as a result of the solid construction, the lack of moving parts and the simplicity.
Small Footprint
The BRUTE oil water separator is designed to fit on ships, platforms and other tight spaces. This unit has a small footprint making it adaptable to most situations.
Low Consumables- Low Maintenance
The standard oil water separator uses no consumables of any kind including filters. This means lower operating costs and headaches. Although the new IMO MEPC 107(49) certified unit requires a filter, the design remains simple and media replacement is made easy. The rugged construction of the oil water separator and it's lack of moving parts make maintenance minimal.
Self Monitoring / Self Priming
These marine oil water separator units are designed from the bottom up to operate automatically and monitor and adjust to your conditions. Self priming systems mean hassle free operation. There is no need for these oil water separator units to be installed on a flat, level, or even immobile surface. This makes them ideal for trucks, ships and other mobile applications.
Withstands Heavy Vibration/Motion
There is no need for these oil water separator units to be installed on a flat, level, or even immobile surface. This makes them ideal for trucks, ships and other mobile applications. Designed for ships, heavy vibrations, violent motion and up to 30 degree plum tilt cause no problems with performance or reliability on these oil water separators.
Low Operating Cost
Because of the solid construction of these marine oil water separators, low maintenance requirement, and low consumables, the operating costs are incredibly low.
High Quality Industrial Components
Each component used in the marine oil water separators has been individually selected for it's industrial strength, strong vendor support, reliability and low maintenance requirements.
Units in Stock for Quick Shipment
We stock various sizes of basic marine oil water separators so as to be able to respond quickly to your needs. We can often take a stocked separator and add the options you need quickly to get you up and separating. Give us a call to see what we can do for you.
Custom Need Consultation
Our engineering department is available for consultation regarding your custom marine oil water separator requirements. Each Specific application usually has some specific needs. Let us help you determine exactly what will work for you.
