The CTC Analytical Services performed a Fuel Analysis test for the Separator Systems Fuel Purifiers. One test performed was an unfiltered single pass and the second test was a filtered single pass. The tests were performed under normal conditions and the unit of measure used were grouped in microns; 5-15u, 15-25u, 25-50u, 50-100u. The purpose of the test was to identify the amount of particulates present during the unfiltered test, particulates present during the filtered test, and the water present under both conditions. The filtered test included the Separator Systems Fuel Purifiers.
The particulate test results are as follows:
5-15u
5-25u
25-50u
50-100u
Water
Unfiltered
47276
10633
6216
760
5812.3
Filtered
17426
2753
1116
196
49.6
The above graph depicts the results from the CTC Analytical Services tests. Fuel Purifier removed over 99% of all water in a single pass. Again, the tests were performed under controlled normal conditions with specific micron ranges for the particulates. The percentage of particulates removed in a single pass were as follows:
5-15u
5-25u
25-50u
50-100u
63%
75%
82%
75%
QUESTIONS? EMAIL US OR CALL FOR ADDITIONAL INFORMATION!