Commercial Vessel Facts | EPA Overview of Permit Scheme
EPA No Discharge Zones by State

MarineVAP™ The Final Solution!

Marine Water Evaporator
Evaporate Your Managed Water Problems Away!
ZERO LIQUID DISCHARGE

Subscribe to the "Oily News!"

Model GPH Dimensions MV8 8 gph 30x30x65 inches 22kW MV16 16 gph 40x40x70 inches 42kW

August 6, 2010 - EPA enhances no discharge zone in New England

July 12, 2010 - Shipping company fined for discharging oily wastewater

May 27, 2010 - New York State Canal System now ‘no discharge zone’

October 1, 2009 - Polembros Shipping LTD. Pleads Guilty to Crimes Related to Pollution from Cargo Ship Traveling to New Orleans

July 15, 2009 - Manager of Tugboat Company Indicted for Clean Water Act Violations

No discharge is a safe discharge!

Unlike storage tanks that take up a lot of room or treatment systems that can be complicated and require constant operator involvement while still relying on pumping the water off for costly third-party disposal.

The electric-powered MarineVAP™, with no emissions, is the “final solution” to managing bilge and gray waters. MarineVAP™ safely and automatically turns waste water to vapor and evaporates it away. Gray water is often the largest waste stream on board modern workboats. MarineVAP™ eliminates the problem.

MarineVAP™ is a safe, closed/sealed unit with a small footprint and external insulated heat coils encircling a smaller heat transfer chamber. Designed with an automatic control system for automated startup, shutdown and operation, the completely self-contained MarineVAP™ system incorporates a pump for metering water into the unit on demand, to keep up with the amount of water evaporated. This process is far more efficient than heating a large tank of water and allows for rapid heating adequate to evaporate waste streams safely and quickly. The proprietary control system includes level controls and automatic shutdown for low level or high temperatures and status monitoring.

MarineVAP™ MV8 #101 evaporates 8 gallons of waste water per hour. Larger sizes are available, as is the SkimOil ShoreVAP, which uses LPG or waste oil to fire the evaporator.

SkimOil is a specialty design manufacturer, consultant and distributor of marine and industrial pollution control equipment and systems. For more than 15 years, SkimOil has provided businesses with solutions to special waste disposal problems and pollution control. SkimOil systems, used in more than 40 countries around the globe, are built to address the unique problems of each business. SkimOil’s innovative equipment and technologies can be used off the shelf or customized to meet the needs of individual companies.

MarineVAP™ evaporates your water disposal problems!

Bilge water, gray water, treated black water! GONE!

New EPA regulations for all workboats over 79' long! See if it affects YOU!

Bilge Water, Gray Water, Treated Black Water
"Nothing overboard!"
No discharge zone? No problem!
ZERO LIQUID DISCHARGE!
GONE - done - end of story!

Skimoil’s^® BilgeVAP is a partial answer to the marine waste water management requirements presented by the new EPA enforcement of the Clean Water Act. The BilgeVAP by Skimoil^® evaporates away the water portion of oily bilge water, gray water and even treated black water coming off of Marine Sanitation Devices (MSD) allowing workboats, barges and even shore facilities to become no discharge zones.

With this simple, rugged device, all the water or slops are automatically heated to boiling and turned into vapor that is then vented to atmosphere through a blower-assisted stack. Venting is easy. Water vapor is not considered a pollutant. Electric heating gives you no emissions!

BilgeVAP evaporates your water disposal problems!

MarineVAP™ MV8 Drawing

QUESTIONS?   CALL NOW! EMAIL: info@skimoil.com

Follow Us on Twitter     Follow Our Blog

MarineVAP™ WorkBoat Show Video
OOPS Filter WorkBoat Show Video | BilgeVAP WorkBoat Show Video