Oil or Gas Fired Waste Water Evaporator

OilEaterVAP Evaporates your wastewater disposal problems away!
Burns diesel/fuel oils and waste oils!

The OilEaterVAP wastewater evaporation system can be effectively used to economically evaporate any industrial wastewaters — all you need is fuel oil, diesel or waste oils. This VERY efficient wastewater evaporator has simple controls, redundant triple safety shutoffs and the ability to burn away waste oils — while evaporating wastewaters, giving you the potential of ZERO Liquid Discharge.

The OilEaterVAP can even be configured as a dual fuel system (optional), able to switch back and forth between diesel and waste oils — or even switching between fuel oils and natural gas / propane. Both burners can use as fuel nearly any type of waste petroleum based oil, or new fuel oil. The gas-oil burners provides the option of having automatic backup to natural gas or propane.
The OilEaterVAP (OeV) is a wastewater evaporation system designed specifically to run on diesel/fuel oil or waste oils. For the commercial marine industry and their unique waste disposal problems this can be a real problem solver! There are two things that the commercial marine industry has a lot of: too much oily bilge & gray water requiring special handling and plentiful waste oils and/or diesel fuel oils. As environmental regulations tighten up for workboats and the commercial marine industry, it’s becoming more important, even critical — for a better way of eliminating or reducing these waste streams and pollution.
OilEaterVAP Specs
Model No. OEV20 OEV40 OEV60
Evaporation Rate - gph 20 40 60
Dimensions 34.5"Wx48"Hx45"L 42"Wx48"Hx74"L 42"Wx48"Hx112"L
BTUs Required 230,000 458,000 688,000
Tank Capacity - gallons 150 250 350
Fuel Types — diesel, fuel oil, waste oil, propane, natural gas ALL ALL ALL
Construction 304 & 316 stainless 304 & 316 stainless 304 & 316 stainless

The OilEaterVAP comes in sizes for use on workboats, barges, terminals, ships, boatyards, shore facilities, dredges, drilling rigs, oil platforms, fuel flats, OSVs etc. (Sizes to evaporate 20 gph / 40 gph /60 gph).  Our smallest OilEaterVAP, the #OEV20, is only 34.5" wide, designed specifically to fit thru any hatch or door to get it onto a workboat. Use it on deck or below deck — in the galley or in the engine room, evaporates 20 gallons per hour!
Got more water? Put the bigger OilEaterVAP #OEV60 on a dock or barge or in your shop!

The unique dual fuel option allows you to even more efficiently burn oily waste waters at the same time you’re evaporating it — for maximum efficiency. Your oily bilge/gray/treated black water — GONE! You have cradle to grave responsibility for your waste oils and special waste waters.
OilEaterVAP is the grave.
No Discharge Zone? (NDZ) — no problem
Bilge water?   Gray water?   Treated black water?
No problemo!

OilEaterVAP evaporates your waters away!

SkimOIL has every technology known to man for removing oil from water. How can we help you?